Wireless & Products

PIR MOTION DETECTOR

Superior transmission range.
PowerCode™ ID factory-selected from 16 million possible combinations.

Smart anti-collision mechanism supports multiple simultaneous transmissions.
Long-life lithium battery included (upto 6 years). Low-battery signalling.
Sleek elegant design.
Available in several optional frequencies in compliance with international standards. Compatible with Visonic Complete™ and all Visonic PowerCode™ wireless panels and receivers.

Either use as a simple alarm or interface

with the web! WATCH THE VIDEO!

Two-way self-powered external wireless Siren

The MCS-710 is a self-powered, fully-wireless outdoor (IP55) siren

and strobe. It requires no external power source and is easily installed without any cabling work, enabling installation even where wiring is difficult or impossible. The siren is compatible with the Visonic Complete®+ and PowerMaxPro control panels.

This fully-supervised siren features anti-collision PowerCode™ technology and provides visual notifications of intrusions, fire alarms, low battery voltage or communication disruptions and auditory squawk notifications of arming and disarming. This enables home owners to arm and disarm the system from outside the house using a keyfob and receive audible and visual verification of system status. This valuable capability prevents false alarms due to breach of entry/exit delay settings.

The MCS-710 is available in several optional frequencies in compliance with European, U.S. and other international standards.

MCS-710 Features:

• Wireless connection between control panel and siren

• Battery operation with no additional power supply required

(battery life up to 3 years)

• Double plastic cover for extra protection against harsh external

conditions (IP55)

• Convenient and rapid no-mess installation

• Audible and visual arming and disarming notifications

• Fully-supervised two-way communication for local and remote

diagnostics

• Status, tamper, low battery and supervision reports to the

control panel

• Triple tamper protection

• Self-test feature that allows users to check the siren and strobe

lights prior to installation

• 100 dB Piezo siren and high-power strobe light

• Available in red and blue strobe lens

X-10 Automation

X-10 is the latest in automation, allowing you to switch on the lights and other applicances at home from your mobile phone or by remote control through your security system.

Simple X-10 Plug-in modules are available for controlling appliances such as lights, fans, air-conditioners, dehumidifiers, coffee pots, stereos, TV's etc. Controlled by any X-10 programmable, wireless or telephone controller.

Man-Down PowerCode™ Transmitter

The MDT-122 is a microprocessor-

controlled "man-down" personal emergency transmitter designed for use by the elderly, the blind & partially sighted, guards and security officers in prisons and institutions, or by people working or living alone at home or in industrial and

other high-risk facilities. The MDT-122 has five types of events:

Distress – by depressing the two emergency buttons simultaneously.

Man-down – when the wearer falls down. Pull-cord – when someone attempts to pull the transmitter off the wearer.

Test – for testing the transmitter. Tamper – when an unauthorized person opens the transmitter.

The Next+ K9-85 MCW is a PowerCode™ wireless digital PIR detector designed to enable homeowners to secure their homes while allowing their pets to move freely anywhere in the house.

Wireless CodeSecure™ Two-way Keyfob Transmitter

The MCT-237 is a 6-button miniature wireless 2-way keyfob with an icon-based LCD display designed for arming and disarming the security system, as well as for emergency signaling, query for status and home automation applications. It provides instant visual and auditory feedback regarding the system status and whether a command has been successfully executed, so that users can always be certain that the system has carried out their command.

Unique to the PowerMaxPro and Visonic Complete security and control systems, the MCT-237 offers the ultimate in ease and performance by integrating an LCD screen in a 2-way keyfob.

Waterproof

Wrist Transmitter

The WT-211 is a 12-bit miniature waterproof wrist-worn transmitter, designed for the blind, partially sighted, elderly & disabled
The transmitter is waterproof and suitable for wearing even in a shower or for use in other wet environments such as, factories, hospitals, gardens, pools, rain conditions etc. Its attractive ergonomic design makes WT-211 easy to wear as a regular watch.

Hand-held CodeSecure™ Wireless Transmitters

User friendly (1-button), (2-button) and (4-button) hand-held CodeSecure™ encrypted wireless transmitters are designed for emergency, arming/disarming and control applications in wireless security systems, as well as access control, home automation and remote control systems.

Waterproof Miniature Pendant PowerCode™ Wireless Transmitter

The MCT-201WP is a miniature

pendent PowerCode™ wireless

transmitter designed for emergency

and control applications in wireless

security systems, and home automation and remote control systems. Fully water-resistant, the pendant is suitable for operation in wet environments such as factories, hospitals, gardens, rain conditions, etc.

Two-way wireless keypad with voice - and a new look

The MKP-151 is a two-way wireless keypad for Visonic Complete® and PowerMaxPro

systems. Once installed and programmed, the keypad provides all of the controls, notifications, indications and voice prompts of the control panel.

The MKP-151 employs two-way wireless secured communication protocol and provides both audible and visual feedback including voice prompts as it carries out the operator's commands to the control panel. Conveniently, the MKP-151 can be used to arm or disarm the system, turn lights on and off, control electrical appliances through X10 modules.

The MKP-151 can be placed in a convenient, easily-accessible location, enabling the control panel to be installed in a location inaccessible to intruders. In case of tampering or sabotage, an alarm sounds and the event is recorded by the control panel. Owners can also install a second keypad in the garage, pool house, or at bedside for convenient arming and control before going to sleep.

Supervised Wireless PowerCode™ Smoke Detector

The MCT-425 is a fully supervised wireless photoelectric smoke detector compatible with PowerMax™ and other Visonic

PowerCode™ wireless systems, designed for a wide range of residential and commercial applications.

Achieving superior smoke detection sensitivity levels, the MCT-425 provides early warning of developing fire. When smoke is detected, the MCT-425 issues both sound and transmitted alarms. To ensure secure communication, transmissions use a PowerCode™ 24-bit ID command code, which is selected from 16 million possible combinations and is therefore unique and virtually impossible to accidentally reproduce. A smart anti-collision algorithm prevents signal jamming by simultaneous transmissions from multiple devices.

PowerCode™ Special Purpose Wireless Detectors Family

Visonic's PowerCodeTM special purpose wireless detectors provide reliable solutions for a wide variety of sensing and detection requirements in wireless systems including:

• X10 Automation

• Motion & Inactivity Detection

• Smoke detection

• Gas detection

• Flood detection

• Glass-break detection

• Vibration detection

• Theft detection for artworks and other objects

• Freezer failure detection

Implementing state-of-the-art detection and transmission technologies, these devices are designed to meet all the requirements of professionals and end users.

To ensure secure communication with the target receiver or control panel, these detectors utilize an advanced PowerCodeTM transmission sequence. Each PowerCode™ 24-bit ID command code is selected from 16 million possible combinations, and is therefore unique and virtually impossible to accidentally reproduce.

A smart anti-collision algorithm prevents signal jamming by simultaneous transmission from multiple devices. Periodic transmission of supervision signals is used to confirm system connectivity at all times, and low-battery signals are sent when the battery needs to be replaced.

These highly reliable top-performance detectors are easy to install and operate in a wide range of residential and commercial wireless applications.

They are available in various frequency bands according to international standards, and are approved for use by radio communication authorities in most countries.

The Next+ K9-85 MCW is a PowerCode™ wireless digital PIR (Passive Infra Red) detector designed to enable homeowners to secure their homes while allowing their pets to move freely anywhere in the house. Enclosing an extra long-life lithium battery this ensures that the detector remains totally reliable. After several years of use the control panel will indicate to you when the battery is low on the detector.

To ensure that we provide trouble-free security systems, we offer all our customers an optional maintenance & service contract for peace of mind. They all include an annual routine maintenance inspection and the testing of all batteries, detectors, sirens and communication equipment.

Systems that are connected to an Alarm Receiving Centre for Police response will need to have a maintenance contract in place with a service visit every six months as per the ACPO Police policy.

...Quite simply the Ideal Wireless

Security Solution. The Visonic Complete®

Gives Independence For EVERYONE!

Single people, Families and Communities, The Elderly, Blind,Partially Sighted & Disabled

Everyone!...

Click here for a brochure of the

Visonic Complete® Wireless Alarm System

• Not to be confused with the Powermax+ DIY Alarm. The Visonic Complete® is a professional grade, wireless system which is only available to the security trade and is installed to the latest British/European Standards.

• Athough it is a wireless system the control panel is designed to be hard-wired to the main electricity supply and programmed by a qualified engineer.

• A simple to use system which you can set and unset by the press of a button fitted at a reasonable price.

• An Ideal Wireless Security Solution for every one with added features for Care & Support.

The Powermax "Complete" Total Security System, Safety Support Solution enables everyone to live a more independent life. Quite simply this is the best featured intruder alarm around, it also has the option to monitor and inform you of any problems at your property. It can be used as an affordable and secure, as well as an easy-to-use basic burglar alarm. The system can monitor motion detectors (including pet tolerant detectors), smoke detectors, gas detectors (CO), fine art detectors, glass-break, smoke and flood detectors.

The system can also be used to monitor the elderly or vulnerable and enable you to have two-way conversations or listen-in to the property. There are the following options available:

now is the time to think

• Socialization Option- Enables the user to call into a

monitoring station where a live, caring human being

provides attention and reassurance.

• Inactivity Monitoring - Monitors pre-defined activities, like getting out of bed or entering the bathroom, and issues an alert if they do not occur within their selected time frames, indicating a possible need for intervention.

It has also been successfully used in community health programs, retirement communities, supervised housing units, nursing facilities and other service providers to protect and care for everyone while maximizing their dignity, independence and convenience. As a simple but fully featured intruder alarm system or an integrated system both are easily affordable.

The Powermax® PRO is here!

..Contact us for more information..

The ultimate in Camera

Flexibility

Today's homeowners want much more than a security system - they want their system to alert them in case of burglary, fire and flood as well as medical emergencies of “at risk” loved ones - anywhere they are, at home or away. But that's just the beginning. They want camera connectivity to view their front doors, and check the safety of their family. They want the ability to turn their electrical appliances on and off by telephone (with X10). Some of them even want control of their property through Internet access or SMS messaging.

Wireless CO Detector
Options & Service Packages For Every Need - Visonic offers the world's broadest range of health and safety options, including: pet tolerant detectors, smoke, gas and flood detection, instant two-way, hands-free voice communication, remote socialization, inactivity monitoring, and emergency panic button. Powermax supports a wide range of service package options— from basic emergency detection to complete wellness supervision and is completely adaptable to individual needs and capabilities.

A Snap to Install & Maintain
Visonic systems are cost-efficient, reliable and virtually maintenance free. It is easy to install and updateable via phone, requiring very few technician visits.

User Friendly & Built To Last
Visonic user-friendly plug-and-play, wall-mounted unit features a remote wireless key-fob for easy use, a powerful speaker for incoming call reception and voice prompts and a sensitive microphone. It enables the selection of up to four (4) private phone numbers as emergency call numbers. Also available are our system's portable units which are sealed, waterproof and comfortable-to-wear.

Gas detector
Powermax+ features:

• Home Safety: Smoke, Gas and Flood Detection- Averts potential tragedy by detecting potentially life-threatening

situations.

• Instant Two-way, Hands-free Voice Communication- Provides and maintains verbal contact during an emergency even from a distance.

• Telemedicine in development - Coming soon compatibility with the coming generation of devices for measuring vital statistics, i.e. heart rate, blood pressure, sugar, oxygen cholesterol levels, etc.

• Speed dialing- Stores up to three numbers for one-touch instant dialing to family and friends.

HOME/SMALL BUSINESS ALARM

FROM £385 INCLUSIVE

FULLY FITTED

click below

The GSM-100 Cellular Communication Module connects to the Visonic Complete or PowerMaxPro system via the standard mobile cellular network. It is recommended for every home as a backup communication line in case of line failure or tampering with standard telephony lines. In addition, it supports remote operation and event reporting via SMS.

The GSM-100 is a must-have for any property without land-based telephone lines, extending full PowerMax® functionality to properties such as homes with VoIP internet based telephony, anchored boats and isolated vacation houses.

The module can be installed in a concealed or remote location, ensuring signaling in case of tampering with the system. The integrity of the backup communication channel is ensured through continuous monitoring.

X-10 Module

X-10 is the latest in automation, allowing you to switch on the lights and other applicances at home from your mobile phone or by remote control through your security system.